Lavender Hibiscus Hydrating Serum Mousse – CSW 007-10
This ultra hydrating formula is combined with anti-oxidants and olive-based esters to promote optimal moisture retention on the skin. Formulated with Fiflow® perfluorocarbon technology, this bubbly serum oxygenates even the toughest areas, reducing the appearance of fine lines and wrinkles.
| Phase A |
|---|
| Deionized Water | 69.15% | | Medextract Aloe Distilled1,2 (Aloe Barbadensis Leaf Water) | 10.00% | | Hibiscus Tea1,3 (Hibiscus Sabdariffa) | 0.10% | | Glycerin 99.7 USP Kosher1 (Glycerin) | 5.00% | | Papaya Extract1,4 (Carica (Papaya) Fruit Extract (and) Propylene Glycol) | 5.00% | | Olivatis™ 151 (Olive Oil Glycereth-8 Esters) | 1.50% |
|
| Phase B |
|---|
| Stabylen 301,5 (Acrylates/Vinyl Isodecanoate Crosspolymer) | 0.35% |
|
| Phase C |
|---|
| Olivatis™ 161 (Olea Europaea (Olive) Fruit Oil (and) Helianthus Annuus (Sunflower) Seed Oil (and) Tocopherol (and) Aloe Barbadensis Leaf Extract (and) Olive Oil Glycereth-8 Esters) | 3.00% | | Ultrapure Lavender Oil1,6 (Lavandula Angustifolia (Lavender) Oil) | 0.20% |
|
| Phase D |
|---|
| NaOH 30% w/w Solution (Sodium Hydroxide) | QS |
|
| Phase E |
|---|
| Sharomix CP 101,7 (Chlorphenesin (and) Phenoxyethanol) | 0.70% |
|
| Phase F |
|---|
| Fiflow® BB611,8 (Perfluorohexane (and) Perfluorodecalin (and) Perfluoropentane) | 5.00% |
|
Suppliers
- 1Coast Southwest, Inc.
- 2Medolla Italia, s.r.l.
- 3Tea Guys
- 4Vivimed Labs USA Inc.
- 53V Inc.
- 6Ultra Chemical, Inc.
- 7Sharon Laboratories
- 8The Innovation Company®
Properties
- pH: 5.0-6.0
- Viscosity: spindle 5 at 10 rpm = 11,960 cst
Instructions
Phase A – Add Phase A to main vessel with shear mixing. Phase B – Once Phase A is uniform, disperse Phase B slowly into main vessel under continued shear mixing. Allot time for material to wet out. Phase C – Add Phase C to main vessel under continued shear mixing. Phase D – Slowly add Phase D to main vessel and QS to pH of 5.5. Note: 5.0-6.0 pH range will suffice. Batch will thicken. Phase E – Add Phase E to main vessel under shear mixing until uniform. Phase F – Homogenize Phase F into main vessel. Once uniform, transfer to final container. Note: Airless container preferred.
REVISION DATE: 01/18/2016
