Hand and Cuticle Balm – CSW 007-63

This ultra-rich, rapid absorbing balm provides long-last hydration and care for dry hands, nails, and cuticles. Bio-based Ultrapure TEWL L is a natural petrolatum substitute. It supplements CrystalPet® HW, an ordorless, non-sticky refined petrolatum with moisturizing and skin protection properties. EndiMoist® HA Solution imparts softness and a supple feel. Vegetable-derived Olivatis™ 15 esters impart an extremely light, non-tacky, silky feel while improving stability and formula efficiency.

Phase A
Puretolâ„¢ 7 Special1,2 (Mineral Oil)36.00%
Ultrapure TEWL L1,3 (Ricinus Communis (Castor) Seed Oil (and) Laurie Acid (and) Hydrogenated
Castor Oil (and) Beeswax (and) Calcium Stearate (and) Rosmarinus Officinalis (Rosemary) Leaf Extract)
5.00%
CrystalPet® HW1,4 (Petrolatum)15.00%
Lanolin Alcohol1 (Lanolin Alcohol)5.00%
Paraffin Wax1 (Paraffin)7.00%
Microcrystalline Wax (Microcrystalline Wax)10.00%
Phase B
Glycerin1 (Glycerin)4.00%
EndiMoist® HA Solution1 (Sodium Hyaluronate)10.00%
DL-Panthenol 50%1 (Panthenol)1.00%
Olivatisâ„¢ 151,5 (Olive Oil Glycereth-8 Esters)6.00%
Fragrance Oil (Fragrance)1.00%

Suppliers

  • 1Coast Southwest, Inc.
  • 2Petro-Canada Lubricants
  • 3Ultra Chemical, Inc.
  • 4PMC Crystal, Inc.
  • 5Medolla Limited

Properties

  • pH: n/a
  • Viscosity: spindle 6 at 20 rpm = 49,400 est (48,000-50,000 est)

Instructions

Phase A – In main vessel, combine Phase A ingredients and begin heating to 60°C under propeller mixing. Continue mixing Phase A until a uniform solution at temperature forms, then discontinue heat. Allow the mixture to cool to 50°C with continuous mixing. Phase B – In a separate vessel, add Phase B ingredients with continuous mixing until uniform. Add Phase B slowly to Phase A until a uniform mixture forms. Continue mixing Phase AB and allow to cool to 35-40°C. Note: The mixture will become thicker and begin to harden slightly. Continue cooling to 35°C and transfer to holding vessel.

REVISION DATE: 12/15/2016

For more information, download PDF