Fluid Thinking. Innovative Solutions


///Good For Your Face Clay Peel Mask
Good For Your Face Clay Peel Mask 2016-12-08T10:13:35+00:00

Good For Your Face Clay Peel Mask – CSW 007-39

Give the face a bonus with this peel-off mask. Pelavie® clays help absorb excess oil and lift away toxins, dirt, and debris. Alguard from the sea immediately tightens the skin, leaves a smooth healthy glow, and an amazing feel. Olive esters and vitamin C help keep the skin moist. Apply evenly, relax, and allow the ingredients to do their work while the mask dries completely. Then peel away, all in one piece. No mess and no excessive rinsing to remove.

Phase A
Deionized Water 69.20%
Coast PVA-241 (Polyvinyl Alcohol) 10.00%
Phase B
Pelavie® Green Clay1,2 (Bentonite) 8.00%
Pelavie® White K Clay1,2 (Kaolin) 3.00%
Phase C
Endicare® DP-530S1 (Polyethyloxazoline) 3.00%
Phase D
Olivatis 151,3 (Olive Oil Glycereth-8 Esters) 4.00%
Alguard PF1,4 (Porphyridium Polysaccharide) 1.00%
C-Vite1,5 (Sodium Acorbyl Phosphate) 1.00%
Phase E
SharoSENSE 2521,6 (Thymol (and) Linalool (and) Phenethyl Alcohol) 0.80%


  • 1Coast Southwest, Inc.
  • 2The Innovation Company®
  • 3Medolla Italia
  • 4Frutarom
  • 5Clariant
  • 6Sharon-Laboratories


  • pH: 6.0 – 7.0
  • Viscosity: spindle 5 at 3.0 rpm = 88,000 – 100,000 cst


Phase A – Add Phase A to main vessel with shear mixing. Begin heating to 75° – 80°C. Note: Slowly disperse polyvinyl alcohol. Once fully dispersed and uniform, begin cool down. Phase B – Add Phase B to main vessel and homogenize. Continue cool down. Phase C – Once cool down is below 50°C, add Phase C to main vessel and continue shear mixing. Phase D – Premix Phase D and add to main vessel under shear mixing. Phase E – Add Phase E to main vessel with shear mixing. Once at room temperature and uniform, transfer to final container.

REVISION DATE: 07/12/2016

For more information, download PDF