Face Mask Treatment – CSW-001-27

This 10-minute mask delivers formaldehyde-free glycolic acid and moisturizing with a cooling sensation.

Phase A
Deionized Water61.90%
Dissolvine® 220-S1,2 (Tetrasodium EDTA)0.20%
Sorbitol 70% (Sorbitol)8.00%
GlyAcid® 70 HP1,3 (Glycolic Acid)1.40%
Phase B
Ultrastarch P21C1,4 (Zea Mays (Corn) Starch)10.00%
Pelavie® Pink Clay1,5 (Bentonite)10.00%
Phase C
Hydrasoft® Sea1,5 (Water (and) Algae Extract (and) Natto Gum (and) Phenoxyethanol (and) Chlorphenesin (and) Citric Acid)4.00%
Creagel® Crystal HPB1,5 (Hydrogenated Polyisobutene (and) Ethylene/Propylene Copolymer)1.00%
Phase D
Sharomix 7051,6 (Benzoic Acid (and) Sorbic Acid (and) Dehydroacetic Acid (and) Benzyl Alcohol)1.00%
Phase E
Endicare® ETP-3051 (Polyacrylamide (and) C13-14 Isoparaffin (and) Laureth-7)2.50%

Suppliers

  • 1Coast Southwest, Inc.
  • 2Akzo Nobel Functional Chemicals LLC
  • 3CrossChem LP
  • 4Ultra Chemical, Inc.
  • 5The Innovation Company
  • 6Sharon-Laboratories Ltd.

Properties

  • pH: 3.73
  • Viscosity: Spindle #5 @ 0.5 rpm = 692,000

Instructions

Phase A – In main vessel, add Phase A, mix and heat to 50C and hold. Phase B – In side vessel, combine Phase B and then slowly add Phase B to Phase A. Increase speed as needed so powder is wetted out and dispersed; batch will thicken. Phase C – In side vessel, blend Phase C together, then add to Phase AB. Once uniform, begin cooling to 40-45C with slow prop or sweep. Phase D – At 40-45C, add Phase D to Phase ABC, continue cooling to 25-30C. Phase E – Add Phase E to Phase ABCD. Initially the batch will be discontinuous. Continue mixing and the batch will become uniform. Stop when the batch is thick and homogenous.

Disclaimer: Seller makes no warranty of any kind, express or implied, concerning the use of this product in any application. User assumes all risk of use, storage, or handling, whether in accordance with directions or not.

REVISION DATE: 09/09/2013

For more information, download PDF