Kisolite® BMP Facial Cleanser

Kisolite® BMP Biogenic Mineral Powder cleanser soothes skin and reduces impurities, imparting a soft feel with visible results. Kisolite® BMP is a powder that is an abundant source of micro- and macro-minerals. It is natural and odor-free with no additives.

Phase A
Deionized Water42.55%
Xanthan Gum (Xanthan Gum)0.50%
Endinol® MILD B-SF65A1 (Sodium Cocoyl Isethionate (and) Cocamidopropyl Hydroxysultaine
(and) Lauryl Glucoside (and) Cocamidopropylamine Oxide (and) Caprylyl/Capryl Glucoside)		23.00%
Phase B
Jojoba Oil1,2 (Simmondsia Chinensis (Jojoba) Seed Oil)5.80%
Coconut Oil1,3 (Cocos Nucifera (Coconut) Oil)5.80%
Cetearyl Alcohol1 (Cetearyl Alcohol)2.30%
Phase C
Olivatis® 191,4 (Olive Oil Polyglyceryl-6 Esters (and) Phospholipids)2.30%
Olivatis® 181,4 (Olive Oil Polyglyceryl-6 Esters (and) Sodium Stearoyl Lactylate (and) Cetearyl Alcohol)4.75%
Phase D
Kisolite® BMP1,5 (Clay)12.00%
Phase E
Lavender Oil (Lavandula Angustifolia (Lavender) Flower Oil)0.20%
Sharomix™ Amplify AM251,6 (Phenoxyethanol (and) Chlorphenesin (and) Caprylyl Glycol (and) Didecyldimonium Chloride)0.80%

Suppliers

  • 1 Coast Southwest, Inc.
  • 2 Jojoba Desert (S.C.S. LTD.)
  • 3 International Cosmetic Science Centre (ICSC)
  • 4 Medolla Iberia S.L.
  • 5 Kisolite Corp.
  • 6 Sharon-Laboratories, Ltd.

Properties

  • pH: 6.5 to 7.5
  • Viscosity: Spindle 5 @ 20 = 15,000 to 18,000 cps.

Procedure

Phase A – In main vessel with mixing, disperse Xanthan Gum in DI water. Add Endinol® MILD B-SF65A. Heat to 65°C to 70°C. Phase B – In a separate vessel, heat and mix Phase B to 65°C to 70°C. Phase C – At 60°C, add Phase C to Phase B. When Phases A and BC reach temperature, add Phase BC to Phase A. Increase speed as needed; avoid introducing air. Phase D – Maintain temperature and slowly add Phase D to Phase ABC. The solution will appear discontinuous. Allow the solution to wet out completely until uniform. Discontinue heat. Allow Phase ABCD to cool. Phase E – At 40°C, add Phase E to Phase ABCD. Transfer to holding vessel. Product will continue to thicken.

REVISION DATE: 02/05/2021

For more information, download PDF