Under the Sun, Under the Eye Defense Filter – CSW 008-10

This lightweight, under-eye, UV defense filter has a broad spectrum of a calculated SPF 30* protection. It is specifically formulated using a gliding roller ball for the delicate eye area, leaving no visible white residue or trace of stickiness. X50 Pure White CC Powder is an encapsulated whitening active ingredient that targets UV-induced pigmentation and helps even the skin tone around the eye area to make it brighter and lighter. Baobab Oil nourishes the skin and optimizes moisturization. UV-dispersions Luxscreen® TR14 AF 50 and Luxscreen® Zn40 AF 50 are based on photostable lipids and mineral UV-filters encapsulated in a polymer structure, offering high stability, water resistance, and transparency in application. *Calculated SPF

Phase A
Deionized Water62.597%
Dissolvine® NA2-S1,2 (Disodium EDTA)0.10%
Glycerin 99.7% USP Kosher1 (Glycerin)3.00%
X50 Pure White CC Powder1,3 (Glycolic Acid (and) Lactic Acid (and) Polyvinyl Alcohol)0.003%
Phase B
Endimate® 33V1 (Caprylic/Capric Triglyceride)4.00%
Baobab Oil1,4 (Adansonia Digitata Seed Oil)1.00%
Endicare® TN1 (C12-15 Alkyl Benzoate)1.20%
Endicare® OMC1 (Ethylhexyl Methoxycinnamate)3.50%
Endicare® OTX1 (Octocrylene)2.00%
Phase C
Endimulse® 165V1 (Glyceryl Stearate (and) PEG-100 Stearate)4.00%
Endimulse® EGDS1 (Glycol Distearate)3.00%
Cetyl Alcohol1 (Cetyl Alcohol)1.00%
Phase D
Endicare® AB1 (Butyl Methoxydibenzoylmethane)3.00%
Uvasorb® MET1,5 (Benzophenone-3)3.00%
Phase E
Luxscreen® TR 14 AF 501,6 (Titanium Dioxide (and) Hydrogenated Polydecene (and)
Styrene/Acrylates Copolymer)
5.00%
Luxscreen® Zn 40 AF 501,6 (Zinc Oxide (and) Hydrogenated Polydecene (and) Styrene/Acrylates
Copolymer)
2.00%
Phase F
Sharomix 7131,7 (Sodium Benzoate (and) Potassium Sorbate (and) Aqua)0.80%
Ultrapure Polymer 20551,8 (Polyvinyl Acetate (and) Aqua)0.80%

Suppliers

  • 1Coast Southwest, Inc.
  • 2AkzoNobel Functional Chemicals LLC
  • 3Infinitec Barcelona
  • 4ICSC International Cosmetic Science Centre
  • 53V Sigma-USA
  • 6The Innovation Company®
  • 7Sharon-Laboratories Ltd
  • 8Ultra Chemical, Inc.

Properties

  • pH: 6.5-7.0
  • Viscosity: spindle 3 @ 50 rpm = 590-700 cst.
  • *Calculated SPF 30

Instructions

Phase A – In main vessel, add Phase A and begin propeller mixing at 200-300 rpm. Heat to 75-80°C. Phase B – In separate vessel, add Phase B ingredients with propeller mixing and begin heating to 40-45°C. Phase C – At 40-45°C, add Phase C ingredients to Phase B and bring heat up to 65-70°C. Phase D – At 65-70°C, add Phase D ingredients to Phase BC. Note: Allot time for powders to dissolve; solution will become yellow. When both phases have reached 75-80°C, add Phase BCD to Phase A slowly under a homogenizer at 2,400 rpm while maintaining the temperature during emulsification. Homogenize for 1 minute. Once the solution is uniform, switch back to propeller mixing, discontinue heat and begin cooling to 30-35°C. Phase E – At 35°C, add phase E to Phase ABCD. Increase speed as needed to mix the two phases together until fully uniform. Phase F – Add Phase F to Phase ABCDE with propeller mixing. Once uniform, transfer to a homogenizer and homogenize at 2,000 rpm and homogenize for <30 seconds. Once complete, transfer to a holding vessel.

REVISION DATE: 07/07/2017

For more information, download PDF