Sweet Clementine Body Lotion – CSW 007-91

A sweet citrus body lotion enriched with antioxidant Cosmosil B, Cosmodan 20, and Endipure® SHEA to leave your skin feeling silky smooth and smelling good. This lightweight, sheer formula contains a blend of naturally derived olive-based emulsifiers Olivatis™ 19 and Olivatis™ 18 that aid in stabilization and impart a luxurious soft skin feel. Paraben-free, mineral oil-free and PEG-free. It will be your Darlin’.

Phase A
Deionized Water63.10%
Dissolvine® NA2-S1,2 (Disodium EDTA)0.20%
Glycerin 99.7% USP Kosher1 (Glycerin)4.00%
Phase B
Safflower Oil1 (Carthamus Tinctorius (Safflower) Seed Oil)4.00%
Cosmodan 201,3 (Elaeis Guineensis (Palm) Oil (and) Brassica Campestris (Rapeseed) Seed Oil)2.00%
Cosmosil B1,3 (Brassica Campestris Seed Oil (and) Oryza Sativa Bran Oil)2.00%
Endimate™ 33V1 (Caprylic/Capric Triglyceride)3.00%
Vitamin E Acetate1 (Tocopheryl Acetate)0.50%
Endipure® SHEA1 (Butyrospermum Parkii Nut Extract)6.00%
Olivatis™ 191,4 (Olive Oil Polyglyceryl-6 Esters (and) Phospholipids)7.00%
Olivatis™ 181,4 (Olive Oil Polyglyceryl-6 Esters (and) Sodium Stearyl Lactylate (and) Cetearyl Alcohol)6.00%
Phase C
NaOH 40% aq. solution (Sodium Hydroxide)q.s.
Phase D
SharoSENSE™ 2561,5 (Thymol (and) Phenetyl Alcohol (and) Hexenyl Methyl Carbonate)0.80%
Olivatis™ 151,4 (Olive Oil Glycereth-8 Esters)0.80%
Clementine Oil (Citrus Clementina Peel Oil)0.60%

Suppliers

  • 1Coast Southwest, Inc.
  • 2AkzoNobel Functional Chemicals LLC
  • 3International Cosmetic Science Centre
  • 4Medolla Limited
  • 5Sharon-Laboratories, Ltd.

Properties

  • pH: 6.5 – 7.0
  • Viscosity: spindle 5 @ 20 rpm = 4,000-5,000 cst.

Instructions

Phase A – Combine Phase A ingredients in formula order into main vessel with propeller mixing (220 to 250 rpm) and begin heating to 60- 65°C. Mix until fully dispersed. Phase B – In a separate vessel, combine the Phase B ingredients using propeller mixing and heat to 60-65°C. Once at desired temperature, add Phase B to Phase A with continuous mixing. Allow 2 to 3 minutes to mix, then discontinue heat and allow solution to cool to <55°C while mixing. Switch to homogenizer for 30 seconds. Phase C – Once temperature is below 40°C, add Phase C to Phase AB with propeller mixing until desired pH is achieved. Phase D – Combine Phase D in a separate vessel, and add to Phase ABC; mix until fully uniform, then transfer to a holding vessel.

REVISION DATE: 07/08/2017

For more information, download PDF