Sunsational Sunscreen – CSW 007-27
A formulation based on an array of highly effective, SPF-boosting sunscreen filters, Sunsational Sunscreen helps block sunburn and has a light, bouncy texture that feels good on the skin.
|
| Phase B |
|---|
| Endicare® TN1 (C12-15 Alkyl Benzoate) | 1.00% | | Olivatis™ 121,3 (Polyglyceryl-3 Pentaolivate) | 1.00% | | Olivatis™ 131,3 (Polyglyceryl-3 Cetearyl Ether Olivate) | 5.00% |
|
| Phase C |
|---|
| Uvasorb® MET1,4 (Benzophenone-3) | 3.00% | | Octyne-B1,5 (Octocrylene) | 2.00% | | Avis1,5 (Butyl Methoxydibenzoylmethane) | 2.20% | | Homosalate1 (Homomenthyl Salicylate) | 8.00% | | Viv-OS1,5 (Ethylhexyl Salicylate) | 3.00% | | Cinnamon1,5 (Ethylhexyl Methoxycinnamate) | 5.00% | | Vitamin E1 (Tocopherol Acetate) | 1.00% |
|
| Phase D |
|---|
| Olivatis™ 151,3 (Olive Oil Glycereth-8 Esters) | 2.00% | | Medxtract Carrot 1:4 Lipo1,3 (Daucus Carota Root Extract (and) Helianthus Annuus (Sunflower) Seed Oil) | 1.00% |
|
| Phase E |
|---|
| Sharomix 706 Plus1,6 (Dehydroacetic Acid (and) Benzoic Acid (and) Natural Vitamin E (and) Benzyl Alcohol) | 0.60% |
|
| Phase F |
|---|
| Endicare® ETP-3051 (Polyacrylamide (and) C13-14 Isoparaffin (and) Laureth-7) | 1.50% |
|
Suppliers
- 1Coast Southwest, Inc.
- 2Akzo Nobel Functional Chemicals LLC
- 3Medolla Limited
- 43V Inc.
- 5Clariant
- 6Sharon-Laboratories
Properties
- pH: 5.5 – 6.0
- Viscosity: spindle 5 at 5 rpm = 65,000 – 70,000 cst
- Estimated SPF value available upon request.
Instructions
Phase A – Add Phase A to main vessel with shear mixing. Begin heating to 75°C-80°C. Phase B – In a separate vessel, add Phase B with shear mixing and begin heating to 75°C-80°C. Phase C – When Phase B reaches desired temperature, add Phase C to Phase B and continue mixing with heat to 75°C-80°C. Hold heat and ensure uniformity of sunscreens. Once both vessels reach 75°C-80°C add Phase BC to Phase A with high shear mixing. Begin cool down. Phase D – Premix Phase D in a separate vessel. When main vessel has cooled to 45°C-50°C add Phase D to main vessel and continue mixing until uniform. Phase E – Add Phase E to main vessel and continue shear mixing until uniform. Phase F – When batch has cooled below 40°C, add Phase F under high shear mixing. Note: Allot time for batch to thicken and reach uniformity. Transfer to final container.
REVISION DATE: 08/10/2016
