Stay and Play Sunscreen – CSW 003-67B
Natural solubilizers and an oil soluble, non-irritant preservative make formulating Stay and Play Sunscreen a breeze. The film-forming capability of Endicare® SC-520 increases water-resistance properties and creates an even spray on the skin. With olive-based emulsifiers and shea butter, the skin is protected without a harsh or heavy feel.
| ||||||||||||||
| ||||||||||||||
|
Suppliers
- 1Coast Southwest, Inc.
- 2Akzo Nobel Functional Chemicals, LLC.
- 33V
- 4Medolla Limited
- 5Clariant
- 6Allyson Enterprises
Properties
- pH: 5.85
- Viscosity: spindle 3 at 1000 rpm: 600-900 est.
- Estimated SPF value available upon request.
- Aerosol compatibility available upon request.
Instructions
Phase A – Add Phase A in order to main vessel under shear mixing and begin heating to 80°C. Phase B – In a separate vessel, add Phase B materials under propeller or shear mixing and begin heating to 80°C. Phase C – In an additional separate vessel, add Phase C materials under propeller or shear mixing and begin heating to 80°C. Note: This ensures proper solubilization of sunscreens before adding to actual oil phase. Once all materials in Phase C are uniform and clear, add Phase C to Phase B and continue mixing and heating. When Phase A and Phase BC are at temperature, add Phase BC to A slowly under very high shear mixing. Note: If emulsion is not “bright white” stronger mixing might be required, i.e. homogenization. Begin cool down. Once emulsion has cooled to 25°-30°C, transfer to final container.
REVISION DATE: 10/18/2016