I’ve Got My Eye On You Eye Shadow – CSW 007-49
This gel eye shadow is long-wearing and resists rubbing off, thanks to the Ultrapolymer 2055. Easygel SOL creates the body and cushion of the gel, while holding the pearlescent pigments in suspension.
| Phase A |
|---|
| Deionized Water | 62.87% |
|
| Phase B |
|---|
| Creastar® Primary Sunstone WL1001,2 (Calcium Aluminum Borosillicate (and) Titanium Dioxide (CI 77891) (and) FD&C Red No. 40 (CI 16035 )) | 1.53% | Creastar® Intense Green Intense WL201,2 (Calcium Aluminum Borosillicate (and) Titanium Dioxide
(CI 77891) (and) D&C Green No. 5 (CI 65170) (and) FD&C Yellow No. 5 (CI 19410)) | 3.91% | Creastar® Primary Emerald WL1001,2 (Calcium Aluminum Borosillicate (and) Titanium Dioxide (CI
77891) (and) D&C Green No. 5 (CI 65170)) | 6.29% |
|
| Phase C |
|---|
| Creaspheres® PMMA WL61,2 (Polymethyl Methacrylate) | 4.25% | | Ultrastarch ASO1,3 (Aluminum Starch Octenylsuccinate) | 4.00% |
|
| Phase D |
|---|
| Easygel SOL1,4 (Carbomer) | 0.60% |
|
| Phase E |
|---|
| Deionized Water | 10.00% | | Glycerin1 (Glycerin) | 1.50% | | Endimoist® HA Solution1 (Sodium Hyaluronate) | 3.00% | | NaOH (40% aq.)1,2 (Sodium Hydroxide) | 0.55% |
|
| Phase F |
|---|
| Ultrapolymer 20551,3 (Water (and) Polyvinyl Acetate) | 0.50% | | Sharomix 7051,5 (Benzoic Acid (and) Sorbic Acid (and) Dehydroacetic Acid (and) Benzyl Alcohol) | 1.00% |
|
Suppliers
- 1Coast Southwest, Inc.
- 2The Innovation Company®
- 3Ultra Chemical Inc.
- 43V Inc.
- 5Sharon-Laboratories
Properties
- pH: 6-7
- Viscosity: spindle 4 at 5 rpm: 30,000-60,000 cst
Instructions
Phase A – In main vessel, add Phase A and propeller mix at 250-300 rpm. Phase B – Add Phase B slowly to Phase A. Solution will become opaque as Phase B is added. Phase C – Add in formula order, Phase C to Phase AB. Phase D – Add the Easygel SOL to Phase ABC. The mixture will thicken. Continue mixing for at least 8 minutes to ensure any solids are wetted out. Phase E – In side vessel, pre-mix Phase E. Once uniform, add Phase E to Phase ABCD. Upon adding Phase E, the mixture will thicken into a gel. Continue mxing until an iridescent mixture is uniform. Phase F – Add in formula order, Phase F to Phase ABCDE and mix until the liquids are dispersed into the mixture. Increase mixing speed as needed to make the mixture thicker. Transfer to holding vessel once complete.
REVISION DATE: 10/13/2016
